The Lyra II IQCC ceiling cassette diffuses air in four directions. This provides a high cooling capacity as well as a high level of comfort. FläktGroup SEMCO chilled beams create an exceptionally comfortable indoor environment. Often used in lieu of fan coil units, chilled beams offer even air dissemination that avoids pockets of concentrated air. Chilled beams send fully mixed air throughout a room to provide overall comfort with the right temperature and humidity.
The Lyra II chilled beam offers a very low noise level combined with high flexibility and high cooling capacity. The Lyra II creates a sound level of less than 20 dB for a single installation and a sound level of less than 25 dB with three beams in the same room. That’s as quiet as a whisper!
The Lyra II IQCC offers flexibility. With a smart combination of functions, the Lyra II can adapt distribution, flow, and throw to different layouts required during the building’s lifetime. With the fastening brackets, the installation of the beam is quick, safe, and easy. The system is installed in two steps. First, the rods and brackets are installed at rough-in time, and the beam itself is installed when the ceiling is ready. Only one person is needed to install Lyra II.
The Lyra II IQCC is available with cable or rigid suspension. As an active chilled beam, Lyra II is available as part of FläktGroup SEMCO's 3fficiency.
The Pi® actuator is an optional flow control device, that can be mounted directly to the LYRA II IQCC, allowing ventilation flow to adjust in response to changes in demand or upstream pressure. Attaching a Pi actuator to a chilled beam allows the chilled beam to be even more flexible in terms of its ability to quickly adapt to constantly changing space conditions.
FlaktGroup SEMCO makes it easier to select and review your options, sound, and performances with our new in-house, web-based selection tool.
LYRA II Installation, Maintenance, and Commissioning
FläktGroup SEMCO Chilled Beam Brochure
Chilled Beams in the News
Outdated Factory Tranformed into LEED-Certified School - ACHR The News
Active Chilled Beams - ACHR The News
Chilled Beams Use Less Pump Energy - Retrofit Magazine
Active Chilled Beams for Green Commercial Buildings - Facilities Net
SEMCO Introduces Active Chilled Beams with Reduced Pump, Fan Energy - Energy Manager Today
Find the instructions for the chilled beam selection tool here.
Use the button below to access the selection tool on the FläktGroup website.
The Neuton® Controlled Chilled Beam Pump Module is an innovative, award winning pump module that provides active condensation control effectively addressing one of the key design concerns regarding active chilled beams. Learn more about the industry’s first smart, plug-and-play controlled chilled beam pump module (CCBPM) for reducing chilled beam system installation and operational costs.
© 2024 FläktGroup SEMCO. All rights reserved. SEMCO® is a registered trademark of SEMCO, LLC and SEMCO Duct and Acoustical Products, Inc. SEMCO, LLC and SEMCO Duct & Acoustical Products, Inc. are part of FläktGroup and are sometimes referred to collectively as FläktGroup SEMCO © 2020 FläktGroup SEMCO. All rights reserved. SEMCO® is a registered trademark of SEMCO, LLC and SEMCO Duct and Acoustical Products, Inc. SEMCO, LLC and SEMCO Duct & Acoustical Products, Inc. are part of FläktGroup and are sometimes referred to collectively as FläktGroup SEMCO